PRODUCTS>>High energy efficiency ratio multi-function heat pump air conditioning teaching experiment system
                                       

High energy efficiency ratio multi-function heat pump air conditioning teaching experiment system

High energy efficiency ratio multi-function heat pump air conditioning experimental system, facing "Engineering Thermodynamics", "Heat Transfer", "The Foundation of Thermal Engineering" and "The Principles of Refrigeration Technology", for the first time, the waste heat utilization of waste water is introduced into the experimental teaching, and the waterway is carried out. Since the cycle, the experimental water is greatly saved, and the test bench is also placed free from external water restrictions. The design of the experimental bench is rich in functions, and can be used in experiments related to thermodynamics and heat transfer. The test bench can also perform engineering thermodynamic experiments on heat transfer performance of different heat exchangers. Research experiments can also be done on the basis of teaching test experiments. The test bench compressor can be controlled by frequency conversion, and the electronic expansion valve can also be adjusted by frequency conversion.

 

 

                              

 


Type no.: E1000/ E1000E

Refrigerating working fluid: R410A

Evaporation temperature: -10 °C ~ +10 °C

Condensation temperature: the maximum temperature does not exceed 60 ° C,

The hot water temperature is 30 ° C ~ 60 ° C

Inverter compressor: power 0~1500 W, speed 0~880 rpm, frequency 10~100 Hz

Heating coefficient (energy efficiency ratio): 5~10

Cooling power: 0~6000 W

Equipped with high-precision pressure sensor with an accuracy rate of ±0.5‰

Measuring water flow accuracy ±0.5%

Measuring working fluid flow accuracy ±0.5%

The temperature control accuracy is ±0.1 °C

The working temperature and the water side temperature display accuracy is 0.01 ° C

The heat transfer performance test accuracy is 3%

The pressure drop performance test accuracy is ±0.5‰

About Process House

 

     We develop, manufacture and sell pressure sensors and humidity sensors and data loggers, power regulators and metrology instruments. Process House has an accredited calibration laboratory that have the corresponding quality level of many national laboratories. We also market temperature validation service for medical and pharmacy laboratories and companies. You can find Process House’s temperature sensors in equipment all over the world. Welcome to Process House!

  • Address:

 

  • E-mail:
  • Tel:
85-29 53RD AVE,ELMHURST 11373,NEW YORK U.S.A.

info@process-house.com

1-718-779-0643